🌤️ Weather Dashboard
Live data from my Ecowitt weather station in Karlsruhe-Knielingen, Germany.
Live from Home Assistant · updated Offline · last update
Live data is currently unavailable.
The connection to the weather station could not be established. Values are shown as “n/a” – please try again in a few minutes.
Current conditions
Temperature: 15.5°C
Raining
Feels like 15.5°CDew point 13.7°C
Last 24 hours
Low 14.7 High 26.6
- Humidity89%
- Wind5.0km/h
- Pressure994.5hPa
- Rain today2.6mm
- UV index0.0
Wind
5.0km/h
from WNW (298°)
1 Bft · Light air
- Gust
- 11.5km/h
- Max gust today
- 20.5km/h
Humidity
89%
Humid
- Dew point
- 13.7°C
- Feels like
- 15.5°C
Sun & UV
UV index 0.0
Low
- Solar radiation
- 22W/m²
- Illuminance
- 2,847lx
Air pressure
994.5hPa
Relative (sea level) · Low
- Absolute pressure
- 994.5hPa
Rain
Raining
2.6mm today
Rain rate: 9.0mm/h
- Last hour
- 2.2mm
- Current event
- 2.2mm
- This week
- 2.8mm
- This month
- 8.7mm
- This year
- 9,600.5mm
Indoor
22.7°C
Comfortable · measured at the gateway
- Indoor humidity
- 58%
Station
Ecowitt GW2000A gateway with WH90 ultrasonic sensor array (solar powered).
- WH90 battery
- 3.10V
- WH90 capacitor
- 4.1V
Weather highlights
Open to load recorded highlights.
Explore sensor history 7 days · This month · 6 months
Choose a sensor to explore its recorded history.
Show recorded values
| Time (Europe/Berlin) | Value |
|---|
About the station
The Ecowitt weather station is installed in the Knielingen district of Karlsruhe. It continuously measures temperature, humidity, air pressure, rainfall (piezo sensor), wind speed and direction, solar radiation, illuminance and UV. The GW2000A gateway itself adds indoor temperature and humidity.
All sensors transmit wirelessly to the Ecowitt gateway, which forwards fresh readings to my Home Assistant instance – a powerful open-source home automation platform – every 60 seconds.
This website reads the latest values directly from Home Assistant via its API and refreshes them automatically while the page is open, so you always see the current conditions from my local weather station. The derived “condition” is based only on the rain sensor and solar radiation – it is not a forecast.
The weather data is also uploaded automatically to Weathercloud via API, where you can view the current conditions as well.